Arduino ESP32 MAKCU Guide
Arduino ESP32 MAKCU 指南
Manual how to connect, set up, update and activate Arduino ESP32 MAKCU to use it with DMA cheats and solve possible errors.
本手册说明如何连接、设置、更新并激活 Arduino ESP32 MAKCU，以配合 DMA 辅助使用并解决可能出现的错误。
This guide will not work other models of arduino.
本指南不适用于其他型号的 Arduino。
You can buy this Arduino ESP32 MAKCU here
你可以在这里购买 Arduino ESP32 MAKCU。
Recommended Hardware
推荐硬件
Recommended USB cable — you can use any USB 2.0 or 3.0 cable
Recommended mouse — any except ROG Omni receiver, vaxee np01s v2 wireless usb dongle, Razer Viper 8k, HyperX plusfire hastle, Mouse Gamer Motospeed V70, Corsair Nightsword
If you don’t have a Second PC we recommend — Mini PC
Recommended OS — Windows 10 or 11
Flashing MAKCU
刷写 MAKCU
Download and keep the DMA Cheats folder on your Second PC.
下载并将 DMA Cheats 文件夹保存在第二台电脑上。
1) Go to folder DMA Cheats/7. Arduino MAKCU and run MAKCU.exe on your Second PC
在第二台电脑上进入 DMA Cheats/7. Arduino MAKCU 文件夹并运行 MAKCU.exe。
2) Hold the left button on MAKCU and at the same time connect USB cable from Second PC to the left port on MAKCU
按住 MAKCU 左侧按钮，同时将第二台电脑的 USB 线连接到 MAKCU 左侧端口。
After connecting, you will see this text in MAKCU application
连接后，你会在 MAKCU 程序中看到以下文字。
3) Click USB1 Flash and wait for process to complete
点击 USB1 Flash 并等待流程完成。
4) Unplug USB cable from MAKCU
从 MAKCU 拔下 USB 线。
5) Hold the right button on MAKCU and at the same time connect USB cable from Second PC to the right port on MAKCU
按住 MAKCU 右侧按钮，同时将第二台电脑的 USB 线连接到 MAKCU 右侧端口。
6) Click USB3 Flash and wait for process to complete
点击 USB3 Flash 并等待流程完成。
Obtain the CH343 driver
获取 CH343 驱动
1) On the Second PC go to DMA Cheats\7. Arduino MAKCU\CH343 Driver
在第二台电脑上进入 DMA Cheats\7. Arduino MAKCU\CH343 Driver。
2) Right click on CH343SER and click Install
右键点击 CH343SER 并点击 Install。
COM port
COM 端口
1) Connect USB cable to the middle port of MAKCU and to your Second PC
将 USB 线连接到 MAKCU 中间端口和第二台电脑。
2) On the Second PC, go to Device Manager and open Ports tab
在第二台电脑上打开设备管理器并展开 Ports 标签。
3) You will see USB-Enhanced-SERIAL CH343 (example COM5). Remember this number. Right click and open properties.
你会看到 USB-Enhanced-SERIAL CH343（例如 COM5）。记住这个编号，右键并打开属性。
4) Go to Port Settings → Advanced
5) Select a COM number below 10 (example COM1). Save.
选择 10 以下的 COM 编号（例如 COM1）并保存。
If MAKCU tool is open, close it and restart MAKCU by unplugging and replugging USB.
如果 MAKCU 工具已打开，请关闭它，并通过拔插 USB 重启 MAKCU。
After completing all steps, the flash process should be completed.
完成所有步骤后，刷写流程应已完成。
Connecting and testing
连接和测试
1) Connect USB cables to MAKCU as shown below
按下图所示将 USB 线连接到 MAKCU。
2) Run MAKCU.exe on your Second PC
在第二台电脑上运行 MAKCU.exe。
3) Click Test
点击 Test。
If your cursor on Main PC teleports, everything is working properly
如果主电脑上的光标发生跳动，说明一切正常。
How to use with Xim Matrix
如何配合 Xim Matrix 使用
1) Follow Xim Matrix setup guide
按照 Xim Matrix 设置指南操作。
2) Connect MAKCU to the Main and Second PC as shown below (do not connect directly to Xim Matrix)
按下图所示将 MAKCU 连接到主电脑和第二台电脑（不要直接连接到 Xim Matrix）。
3) Launch game and set input to mouse and keyboard
启动游戏并将输入设置为鼠标和键盘。
4) Launch DMA cheat and configure aimbot
启动 DMA 辅助并配置自瞄。
I recommend watching the Video Manual
视频教程 to get it right.
Xim guide: https://guide.xim.tech
Video Manual
视频教程
Mouse Operation Bugs
鼠标操作异常
- Ensure the flashing process has been followed correctly.
确认刷写流程已正确完成。 - Press Log Enabled (device reboots).
点击 Log Enabled（设备会重启）。 - Submit logs to support ticket if needed.
如有需要，将日志提交给支持工单。
Mouse doesn’t work
鼠标无法工作
Reconnect all cables and mouse from Makcu.
重新连接 MAKCU 的所有线缆和鼠标。
Mouse not passing AIO test
鼠标无法通过 AIO 测试
If your mouse does not pass the move test, restart the AIO then try again.
如果鼠标无法通过移动测试，请重启 AIO 后再试。
Mini PC blocking MAKCU
迷你电脑阻止 MAKCU 工作
There is a chance your mini pc is blocking Makcu from working, currently the ch340 chip on board’s is blocking Makcu.
你的迷你电脑可能会阻止 MAKCU 工作，目前板载 CH340 芯片可能会阻止 MAKCU 连接。
Some chairs will default to ch340 over ch343, and it will block Makcu from connecting.
某些设备会默认使用 CH340 而不是 CH343，从而阻止 MAKCU 连接。
How to check if you have CH340?
如何检查是否有 CH340？
Open up Device Manager.
打开设备管理器。
Then find Ports(COM & LPT) and open the list.
然后找到 Ports (COM & LPT) 并展开列表。
MAKCU works but cheat doesn’t
MAKCU 正常但辅助不工作
You will see USB-SERIAL “CH340” if you don’t have it then your safe from this issue.
如果看到 USB-SERIAL “CH340”，说明存在该问题；如果没有，则不会受此问题影响。
A temporary solution:
临时解决方案：
1. Uninstall Ch340 from Device Manager
从设备管理器卸载 CH340。
2. Just uninstall it before opening your cheat every time
每次打开辅助前先卸载它。
Note: this is not a permanent fix, and cannot be resolved. its not a Makcu issue, its due to the way cheats default kmbox b pro and arduino over Makcu
注意：这不是永久修复，也无法彻底解决。这不是 MAKCU 的问题，而是辅助默认优先使用 Kmbox B Pro 和 Arduino 的方式导致的。
Aimbot is not Working
自瞄无法工作
If the MAKCU test was successful, but Aimbot doesn’t work in the game with directcheats:
Make sure that you have started the cheat in mode with Kmbox.
确认你是以 Kmbox 模式启动辅助。 Do check it go to
C:\Users\*username*\Documents\directcheats.store
You will see .cfg files of your games.
你会看到游戏的 .cfg 配置文件。
If you are playing Call of Duty, open MainCOD.cfg via Notepad
如果你玩的是 Call of Duty，请用记事本打开 MainCOD.cfg。
Find the line “I_DONT_HAVE_KMBOX”
找到 “I_DONT_HAVE_KMBOX” 这一行。
If you want to play with MAKCU it should be written “I_DONT_HAVE_KMBOX = “: false,
Save it and close the file.
保存并关闭文件。
After you launched a game and the cheat you need to enable Aimbot and set it up through menu.
启动游戏和辅助后，需要在菜单中启用并设置 Aimbot。
Make sure that you have configured everything correctly.
确认所有内容都已正确配置。
Where to download?
在哪里下载？
You can download DMA Cheats folder here
你可以在这里下载 DMA Cheats 文件夹 — https://vipercheats.com/download
